Configuring Airtel Beetel 220BX in Ubuntu

If you have been unable to get my Beetel 220BX ADSL2 Modem to configured
and working in Ubuntu (latest version) and wants dual boot then follow this simple method described by “Gurpreet Singh Bhaiya”
Procedure
1. Configure the modem in pppoe mode
Type 192.168.1.1(this is gateway i.e. modem) in the bowser’s URL
——enter the username and password
Username : admin
Password : password
2. Now the beetel page will open up,
a) Click the WAN link given on the left side
b) Configuration table comes up
c) Click the edit button
3. Configure the VPI and VCI values in airtel broadband
In WAN edit button you can enter the vpi and vci values, please follow the following specific values in airtel broadband configuration
VPI : 1
VCI : 32
click on next button
4. Configure connection in airtel broadband
You can select the connection type in the edit option of WAN, choose the following values for airtel broadband configuration
a) PPP over ethernet (PPPoE)
at the bottom on this page there is a drop down menu to select
b) ENCAPSULATION MODE
select LLC/SNAP-BRIDGING
cilck next button
5. Configure PPP Username and Password
– PPP Username: user name that u got from airtel (***********_dsl@airtelbroadband.in)
PPP password : **********
PPPoE Service Name : airtel
Authentication mode : AUTO
click next button
6. Enable IGMP Multicast, and WAN Service
| Enable IGMP Multicast do not select this |
| Enable WAN Service select this |
| Service Name pppoe_1_32_1 |
click next button
7. WAN Setup – Summary
click on SAVE
8. Wide Area Network (WAN) Setup
click SAVE/REBOOT
Modem will reboot and your modem is configured
NETWORK CONFIGURATION in airtel broadband
Configure Static IP
static ip: 192.168.1.2 -192.168.1.254 (enter any one of these, its the ip range)
subnet mask : 255.255.255.0
gateway ; 192.168.1.1
Configure DNS
Add DNS
202.56.215.54
202.56.215.55
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
October 5th, 2008 at 9:57 am
Please help me solve the problem. : I have airtel adsl modem with static IP. I have installed IP camera in my computer. Now I can visit to camera through internet in my computer, but from other computer I can not browse the computer having IP camera.
Does the problem with adsl modem port forwarding, if yes then how to forward the port ?
October 6th, 2008 at 5:40 am
@mani
See the following post for forwarding Ports in your modem
http://sanjaygoel.blogspot.com/2007/06/port-forwarding-in-airtel-modem.html
http://www.trap17.com/index.php/enabling-port-forwarding-using-adsl-modem-built-router_t34808.html
http://forum.portforward.com/