PINOUTS AND CODES FOR PANASONIC MOBILES
No Comments » | This post was viewed 12452 times.
Panasonic G500
IEMI:
To view IMEI number *#06#
——————————————————————————–
PINOUTS
1 – Ground
2 – TX_Audio
3 – Audio_Ground
4 – HF_ON (L=ON) -> L=H/F ON
5 – AOP_Sense <- Data Adaptor Select
6 – Serial_Up <- UART up (9600,33.8kbps)
7 – Serial_Down -> UART down
8 – External_Power <- POWER FOR CHARGING
9 – Ground
10 – RX_Audio
11 – Radio_Mute -> L=MUTE
12 – HF_Sense <- L=H/F MODE
13 – Reserved L=FLASH WRITE ENABLE
14 – Ignition <- H=ON
15 – Logic_Power -> H=HANDSET ON
16 – PAON -> Power Amplifier Control Signal
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
Leave a Reply