In my previous post of Hirens Boot CD 8.4 i described how hirens is our life saver.In short this the dude which containing various diagnostic programs such as partitioning agents, system performance benchmarks, disk cloning and imaging tools, data recovery tools, MBR tools, BIOS tools, and many others for fixing various computer problems.If your pc get crushed,you get blue screen erron or it can’t boot with your any of operation system then feel free to call your bootable CD. Hiren’s Boot CD has an extensive list of software. Utilities with similar functionality on the CD are grouped together and seem redundant; however, they present choices through UI differences.

::Download with any of given Mirrors::

Hirens.BootCD

::Direct link::Download Hiren’s BootCD 9.3

::Direct link::Download Hiren’s BootCD 9.3

HTTP (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

HTTP (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

HTTP (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

HTTP (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

HTTP (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

Torrent (mirror): Hiren’s BootCD v9.3 incl. keyboard patch
Torrent (mirror): Hiren’s BootCD v9.3 incl. keyboard patch
Torrent (mirror): Hiren’s BootCD v9.3 incl. keyboard patch

*Special Thanks to  Max Thran  for proving the mirrors

• Hirens Boot CD 8.4
• BackTrack – security penetration testers
• K-Lite Codec Pack Full 2.82
• Release Candidate Ubuntu 9.04 Available For Download
• BitComet now lets you preview downloads

Join our Facebook Fanpage

BackTrack is the most Top rated linux live distribution focused on penetration testing. With no installation whatsoever, the analysis platform is started directly from the CD-Rom and is fully accessible within minutes.BackTrack consists of more than 300 different up-to-date tools which are logically structured according to the work flow of security professionals. This structure allows even newcomers to find the related tools to a certain task to be accomplished.

::screen shots::

::Downloads::

Mirror 1 – provided by Belnet

http://ftp.belnet.be/mirror/backtrack/bt2final.iso
MD5: 990940d975f13d8418b0daa175560ae0

ftp://ftp.belnet.be/mirror/backtrack/bt2final.iso
MD5: 990940d975f13d8418b0daa175560ae0

Mirror 2 – provided by SWITCHmirror

http://mirror.switch.ch/ftp/mirror/backtrack/bt2final.iso
MD5: 990940d975f13d8418b0daa175560ae0

ftp://mirror.switch.ch/mirror/backtrack/bt2final.iso
MD5: 990940d975f13d8418b0daa175560ae0

Mirror 3 – provided by Secaron

ftp://mirror.secaron.lu/backtrack/bt2final.iso
MD5: 990940d975f13d8418b0daa175560ae0

Mirror 4 – provided by Pascal / Winboard

http://download.winboard.org/details.php?file=824
MD5: 990940d975f13d8418b0daa175560ae0

Torrent – provided by IRC community

http://www.demonoid.com/files/download/HTTP/1052984/6746204
MD5: 990940d975f13d8418b0daa175560ae0

• K-Lite Codec Pack Full 2.82
• Your next lifesaver is Hirens Boot Cd 9.4
• Hirens Boot CD 8.4
• Link Ace says how to maintain urls
• DivX Pro VFW Codec

Join our Facebook Fanpage

Once i start my some of forums & blogs for example
www.honeytech.wordpress.com
in free host/service like wordpress.com but what i get out of my hard work?
though i get more than 300000+ visitors in few months but alas i can’t earn even a single penny out of this coz i’m not authorized to put adds on it ,any how i hacked to put so then result was the banned from the services.The whole thing was so pain so i restart my blog on private host.

Though is must say that” guy’s over wordpress are so generous & kind that they always restore my blog on behalf of requests”. So i would prefer that every one should blog on private hosted blog the cost of this will be near less than you earn from adds out of it.Now i earn $4-$6per day out of adds.

Note:-If you need your own setup in future feel free to bother me i’ll arange the whole things includes

• free .com domain
• 1gb space
• 100mail id each of 2gb
• Setup of forum/blogs

Total cost will be $8.5/month & all things will be professional,handy ready to use.

• Get A Private Wordpress Blog
• Wordpress Blog Re Suspended & activated after 3hr’s.
• Slow Blog Solution
• 10 ways to earn from open source
• How to add poll in your blog

Join our Facebook Fanpage

Many time we get Blue Screen of Death at boot – the first option should be to boot into Safe Mode (press F8 during bootup).

Some hardware failures are so severe they prevent booting into Safe Mode.

The recovery console allows an alternative boot option giving a limited command prompt – this can be used to disable services or replace system files until you are able to boot into safe mode.

Recovery Console commands:ATTRIB   Change file attributes

BATCH    Execute a batch file

CD       Change directory

CHKDSK   Check Disk

CLS      Clear screen

COPY     Copy files*

DEL      Delete Files*

DIR      Directory listing

DISABLE  Disable Service

DISKPART Create or delete disk Partitions (like running setup)

ENABLE   Enable Service

EXIT     Quit the recovery console and reboot

EXPAND

FIXBOOT  Write a new boot sector to the system partition

FIXMBR   Repair the Master boot Record

FORMAT   FORMAT drive /FS:NTFS

HELP



LISTSVC  List all services and drivers

LOGON    Logon as administrator (local)

MAP      List local physical drive mappings

MAP arc  List local physical drive mappings(ARC path)

MD       Make Directory*

MORE

RD       Remove Directory*

REN      Rename file*

SYSTEMROOT Set the current directory to be %Systemroot%



* File operations are only possible on:

  system directories, floppy drive(removable media), Root directories,

  local install sources. You can copy FROM but not TO a floppy disk.

Installation:

The recovery console is not installed by default (it’s only 7 Mb), install from the W2K CD with the command:
D:\i386\winnt32 /cmdcons

The recovery console can also be run from the Win 2K boot floppies.

• Edit the Windows boot settings
• Your next lifesaver is Hirens Boot Cd 9.4
• Offline NT Password & Registry Editor, Bootdisk / CD
• Hidden commands in windows …
• “resolved” New YaHoo! MeSseNger ViRus Attack!!

Join our Facebook Fanpage

Edit the Windows boot settings stored in Boot.ini

Default identification strings:

OS Load Options = /Fastdetect
Load Identifier = Microsoft Windows XP Professional

If you intend to rebuild the boot.ini file, delete it first – boot into the recovery console then:

ATTRIB -H -R -S C:\Boot.ini DEL C:\Boot.ini Bootcfg /Rebuild Fixboot

Syntax

      BOOTCFG /addsw    Add OS load options for an OS entry in boot.ini      BOOTCFG /copy     Duplicate the entries for an OS instance.

BOOTCFG /dbg1394  Configure 1394 port debugging

BOOTCFG /debug    Edit the debug settings for an OS.

BOOTCFG /default  Specify the default OS

BOOTCFG /delete   Delete an OS entry [operating systems] section of Boot.ini

BOOTCFG /ems      Redirect the EMS console to a remote computer (server only).

                        (Emergency Management Services)



      BOOTCFG /list     List entries in boot.ini

BOOTCFG /query    Display section entries from Boot.ini

BOOTCFG /raw      Add OS load options, specified as a string

BOOTCFG /rebuild  Totally rebuild boot.ini (use when Windows won't start)

BOOTCFG /rmsw     Remove OS load options for an OS

BOOTCFG /timeout  Change the OS time-out value.

• Windows Recovery Console commands
• Offline NT Password & Registry Editor, Bootdisk / CD
• “resolved” New YaHoo! MeSseNger ViRus Attack!!
• Hidden commands in windows …
• Firefox2 Tweaks: Power-Surfing Experience

Join our Facebook Fanpage

Hey guy i make a new blog http://honeytech.blogspot.com/ on blogger because i can’t post many content of hacking n other stuff here(once i banned from wordpress dude to illegal stuffs but dey all r 4 of educational use Banned by wordpress)

so i decide to share it with u all here

Catch Me If U Can…!!

• Wordpress Blog Re Suspended & activated after 3hr’s.
• Banned by wordpress
• Get A Private Wordpress Blog
• Among Top Blogs in 4 months
• HTML Injection

Join our Facebook Fanpage

hey do u know this blog
{hacking,full downloads,codes,tips tricks, mobile free softwares download, vedio mp3 download,cracking,xp-genuine}
getng popular day by
it’s beeng only 4 months
& it got place  among Top Blogs
The most popular WordPress.com blogs are ranked here according to a special formula.
watch the wordpress new’s to saw my blog
Catch Me If U Can..!!
@ 23 no as dated on 8dec 2006
here the link to saw d news:-
http://botd.wordpress.com/?lang=en

• Get A Private Wordpress Blog
• My New Blog-Most wanted
• Banned by wordpress
• How to use multi tabbed menu in wordpress
• Give the gift of WordPress credits

Join our Facebook Fanpage

HEY GUY’S DUE TO LARGE NO OF MY VISITOR’S(APPORX 3000/DAY) FNDS I WANNA START DIS THREAD IN WHICH U MAY POST COMMENT REGARDING UR NEED (WHATEEVER U WANT?)

ME (& U ALSO) UPLOAD IT FAST (AS SOON AS)

AS “HUMAN KNOWLEDGE BELONGS TO THE WORLD”

IF U HV THE ANS OF REQUESTED QUESTION U GEEKS CAN ALSO REPLY TO THEM..!!

SO ENJOY UR & KEEP’S ROCKING WITH ME YAAR..!!

WAITING 4 UR ROCKING RESPONCE..

• Today’s era and open source
• Question & Answer Based IKnowTweet.com
• Madonna ft. Justin Timberlake 4 Minutes (Offical Video)
• Free Hugs Campaign – Inspiring Me
• Still In Focus..!!

Join our Facebook Fanpage

Computational models for first language acquisition

Landmark Guided Forwarding

Probabilistic word sense disambiguation : Analysis and techniques for combining knowledge sources

Decomposing file data into discernible items

On the application of program analysis and transformation to high reliability hardware

Local reasoning for Java

Anonymity and traceability in cyberspace

Robbing the bank with a theorem prover

DOWNLOAD MUCH MORE AWESOME TECHNICAL REPORTS HERE

• Network intrusion prevention: Snort
• Vista Minimum Requirements Unrealistic!
• 500 Java Tips
• 15 best Intranet applications for small office and local workgroups
• 330 Java Tips

Join our Facebook Fanpage

Defining Ajax

Ajax isn’t a technology. It’s really several technologies, each flourishing in its own right, coming together in powerful new ways. Ajax incorporates:

• standards-based presentation using XHTML and CSS;
• dynamic display and interaction using the Document Object Model;
• data interchange and manipulation using XML and XSLT;
• asynchronous data retrieval using XMLHttpRequest;
• and JavaScript binding everything together.

The classic web application model works like this: Most user actions in the interface trigger an HTTP request back to a web server. The server does some processing — retrieving data, crunching numbers, talking to various legacy systems — and then returns an HTML page to the client. It’s a model adapted from the Web’s original use as a hypertext medium, but as fans of The Elements of User Experience know, what makes the Web good for hypertext doesn’t necessarily make it good for software applications.

Figure 1: The traditional model for web applications (left) compared to the Ajax model (right).

This approach makes a lot of technical sense, but it doesn’t make for a great user experience. While the server is doing its thing, what’s the user doing? That’s right, waiting. And at every step in a task, the user waits some more.

Obviously, if we were designing the Web from scratch for applications, we wouldn’t make users wait around. Once an interface is loaded, why should the user interaction come to a halt every time the application needs something from the server? In fact, why should the user see the application go to the server at all?

How Ajax is Different

An Ajax application eliminates the start-stop-start-stop nature of interaction on the Web by introducing an intermediary — an Ajax engine — between the user and the server. It seems like adding a layer to the application would make it less responsive, but the opposite is true.

Instead of loading a webpage, at the start of the session, the browser loads an Ajax engine — written in JavaScript and usually tucked away in a hidden frame. This engine is responsible for both rendering the interface the user sees and communicating with the server on the user’s behalf. The Ajax engine allows the user’s interaction with the application to happen asynchronously — independent of communication with the server. So the user is never staring at a blank browser window and an hourglass icon, waiting around for the server to do something.

Figure 2: The synchronous interaction pattern of a traditional web application (top) compared with the asynchronous pattern of an Ajax application (bottom).

Every user action that normally would generate an HTTP request takes the form of a JavaScript call to the Ajax engine instead. Any response to a user action that doesn’t require a trip back to the server — such as simple data validation, editing data in memory, and even some navigation — the engine handles on its own. If the engine needs something from the server in order to respond — if it’s submitting data for processing, loading additional interface code, or retrieving new data — the engine makes those requests asynchronously, usually using XML, without stalling a user’s interaction with the application.

Who’s Using Ajax

Google is making a huge investment in developing the Ajax approach. All of the major products Google has introduced over the last year — Orkut, Gmail, the latest beta version of Google Groups, Google Suggest, and Google Maps — are Ajax applications. (For more on the technical nuts and bolts of these Ajax implementations, check out these excellent analyses of Gmail, Google Suggest, and Google Maps.) Others are following suit: many of the features that people love in Flickr depend on Ajax, and Amazon’s A9.com search engine applies similar techniques.

These projects demonstrate that Ajax is not only technically sound, but also practical for real-world applications. This isn’t another technology that only works in a laboratory. And Ajax applications can be any size, from the very simple, single-function Google Suggest to the very complex and sophisticated Google Maps.

At Adaptive Path, we’ve been doing our own work with Ajax over the last several months, and we’re realizing we’ve only scratched the surface of the rich interaction and responsiveness that Ajax applications can provide. Ajax is an important development for Web applications, and its importance is only going to grow. And because there are so many developers out there who already know how to use these technologies, we expect to see many more organizations following Google’s lead in reaping the competitive advantage Ajax provides.

Moving Forward

The biggest challenges in creating Ajax applications are not technical. The core Ajax technologies are mature, stable, and well understood. Instead, the challenges are for the designers of these applications: to forget what we think we know about the limitations of the Web, and begin to imagine a wider, richer range of possibilities.

It’s going to be fun.

Ajax Q&A

March 13, 2005: Since we first published Jesse’s essay, we’ve received an enormous amount of correspondence from readers with questions about Ajax. In this Q&A, Jesse responds to some of the most common queries.

Q. Did Adaptive Path invent Ajax? Did Google? Did Adaptive Path help build Google’s Ajax applications?

A. Neither Adaptive Path nor Google invented Ajax. Google’s recent products are simply the highest-profile examples of Ajax applications. Adaptive Path was not involved in the development of Google’s Ajax applications, but we have been doing Ajax work for some of our other clients.

Q. Is Adaptive Path selling Ajax components or trademarking the name? Where can I download it?

A. Ajax isn’t something you can download. It’s an approach — a way of thinking about the architecture of web applications using certain technologies. Neither the Ajax name nor the approach are proprietary to Adaptive Path.

Q. Is Ajax just another name for XMLHttpRequest?

A. No. XMLHttpRequest is only part of the Ajax equation. XMLHttpRequest is the technical component that makes the asynchronous server communication possible; Ajax is our name for the overall approach described in the article, which relies not only on XMLHttpRequest, but on CSS, DOM, and other technologies.

Q. Why did you feel the need to give this a name?

A. I needed something shorter than “Asynchronous JavaScript+CSS+DOM+XMLHttpRequest” to use when discussing this approach with clients.

Q. Techniques for asynchronous server communication have been around for years. What makes Ajax a “new” approach?

A. What’s new is the prominent use of these techniques in real-world applications to change the fundamental interaction model of the Web. Ajax is taking hold now because these technologies and the industry’s understanding of how to deploy them most effectively have taken time to develop.

Q. Is Ajax a technology platform or is it an architectural style?

A. It’s both. Ajax is a set of technologies being used together in a particular way.

Q. What kinds of applications is Ajax best suited for?

A. We don’t know yet. Because this is a relatively new approach, our understanding of where Ajax can best be applied is still in its infancy. Sometimes the traditional web application model is the most appropriate solution to a problem.

Q. Does this mean Adaptive Path is anti-Flash?

A. Not at all. Macromedia is an Adaptive Path client, and we’ve long been supporters of Flash technology. As Ajax matures, we expect that sometimes Ajax will be the better solution to a particular problem, and sometimes Flash will be the better solution. We’re also interested in exploring ways the technologies can be mixed (as in the case of Flickr, which uses both).

Q. Does Ajax have significant accessibility or browser compatibility limitations? Do Ajax applications break the back button? Is Ajax compatible with REST? Are there security considerations with Ajax developm

• Yahoo Messenger Virus Detected
• Windows Recovery Console commands
• Offline NT Password & Registry Editor, Bootdisk / CD
• Download Technical Reports of CAMBRIDGE UNV.
• Edit the Windows boot settings

Join our Facebook Fanpage

This z d way to make un-deletable files, and encrypted files that only you, or who you permit, can access! This is how you do it:

1.) Open cmd, or what ever command prompt you’re using.
2.) type cacls the_drive_name:\the_file_name /p administrator:N
3.) it will ask Y/N enter y
4.)type cacls the_same_drive_name:\the_same_file_name /p your_account_name:F
5.) it will ask Y/N enter y
6.) done, ENJOY,,!! now only you can: open, delete or write to this file!

• How To: Create a New User With Admin Rights On a NetwoRK
• “resolved” New YaHoo! MeSseNger ViRus Attack!!
• Windows Recovery Console commands
• Hidden commands in windows …
• Open password protected MS Word or Excel files

Join our Facebook Fanpage

• This is a utility to (re)set the password of any user that has a valid (local) account on your Windows NT/2000/XP/2003 system, by modifying the encrypted password in the registry’s SAM file.

• You do not need to know the old password to set a new one.

• It works offline, that is, you have to shutdown your computer and boot off a floppy disk or CD. The boot-disk includes stuff to access NTFS partitions and scripts to glue the whole thing together.

• Works with syskey (no need to turn it off, but you can if you have lost the key)

• Will detect and offer to unlock locked or disabled out user accounts!

Caution: If used on users that have EFS encrypted files, and the system is XP or later service packs on W2K, all encrypted files for that user will be UNREADABLE! and cannot be recovered unless you remember the old password again!

Download links:

• Bootdisk image (4605) (~3MB) – Bootable CD image with newer drivers

• bd080526.zip (~1.4MB) -
  

To write these images to a floppy disk you’ll need RawWrite2 which is included in the Bootdisk image download. To create the CD you just need to use your favorite CD burning program and burn the .ISO file to CD.

How to make and use the drivers floppy

How to make the floppy

Overview

1. Disk select, tell which disk contains the Windows system. Optionally you will have to load drivers.
2. PATH select, where on the disk is the system?
3. File select, which parts of registry to load, based on what you want to do.
4. Password reset or other registry edit.
5. Write back to disk (you will be asked)

must read below for complete procedure n problem

DON’T PANIC!! – Most questions can usually be answered with the default answer which is given in [brackets]. Just press enter/return to accept the default answer.

1. DISK SELECT

Which disk contains your Windows system?

========================================================= . Step ONE: Select disk where the Windows installation is ========================================================= Disks: Disk /dev/ide/host0/bus0/target0/lun0/disc: 2147 MB, 2147483648 bytes NT partitions found:  1 :   /dev/ide/host0/bus0/target0/lun0/part1    2043MB  Boot  Please select partition by number or a = show all partitions, d = automatically load new disk drivers m = manually load new disk drivers l = relist NTFS/FAT partitions, q = quit Select: [1]

• For most machines only one disk and parition is listed, if so, just go with selection 1 (default)
• Otherwise select partition
• If no disks or not all disks are shown, you may need to load disk drivers, for SCSI-controllers (or some IDE-raid controllers). Select d to go to the driver select menu for auto-probe (based what’s found on the PCI bus)
• If auto-probe won’t work, you may have to load something manually, select m to do that (like the old system)

2. HOW TO MANUALLY LOAD DRIVERS

Try auto-probe (d) first, only do this if you have to manually try to load some or all drivers.

Select: [1] m ==== DISK DRIVER / SCSI DRIVER select ==== You may now insert or swap to the SCSI-drivers floppy Press enter when done:  Found 1 floppy drives Found only one floppy, using it.. Selected floppy #0 Mounting it.. Floppy selection done.. SCSI-drivers found on floppy:  1 BusLogic.o.gz 2 aic7xxx.o.gz 3 sym53c8xx.o.gz [ ... ]  SCSI driver selection:   a - autoprobe for the driver (try all)   s - swap driver floppy   q - do not load more drivers   or enter the number of the desired driver  SCSI driver select: [q]

• Select a for auto-probe, it will try to load all drivers, and stop when one loads properly. Some drivers may need more driver modules, so you may have to redo the auto-probe several times.
• Or if you know what you want, just enter it’s number or name.

SCSI driver select: [q] a [ BusLogic.o.gz ] Using /tmp/scsi/BusLogic.o PCI: Found IRQ 11 for device 00:10.0  [.... lots of driver / card info ...]  scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi0 : BusLogic BT-958   Vendor: FooInc   Model: MegaDiskFoo  Rev: 1.0    Type:   Direct-Access                      ANSI SCSI revision: 02  [ ... ]  Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 8388608 512-byte hdwr sectors (4295 MB) Partition check:  /dev/scsi/host0/bus0/target0/lun0: p1 Driver BusLogic.o.gz loaded and initialized.

• You may then quit the selection with q or try for more drivers.
• When you quit, you will get back to the disk select (see above) and hopefully see more disks.

3. PATH AND FILE SELECT

Where’s the Windows system located?

On the selected partition/disk, the main files for windows can theoretically be anywhere. And we must find the registry files to be able to edit them. There are however some usual places:

• winnt35/system32/config – Windows NT 3.51
• winnt/system32/config – Windows NT 4 and Windows 2000
• windows/system32/config – Windows XP/2003 and often Windows 2000 upgraded from Windows 98 or earlier.

These usual paths will be checked, and if found, they will be suggested as the default.

Selected 1 Mounting on /dev/ide/host0/bus0/target0/lun0/part1 NTFS volume version 3.1. Filesystem is: NTFS  ========================================================= . Step TWO: Select PATH and registry files ========================================================= What is the path to the registry directory? (relative to windows disk) [windows/system32/config] :  -r--------    1 0        0          262144 Jan 12 18:01 SAM -r--------    1 0        0          262144 Jan 12 18:01 SECURITY -r--------    1 0        0          262144 Jan 12 18:01 default -r--------    1 0        0         8912896 Jan 12 18:01 software -r--------    1 0        0         2359296 Jan 12 18:01 system dr-x------    1 0        0            4096 Sep  8 11:37 systemprofile -r--------    1 0        0          262144 Sep  8 11:53 userdiff  Select which part of registry to load, use predefined choices or list the files with space as delimiter 1 - Password reset [sam system security] 2 - RecoveryConsole parameters [software] q - quit - return to previous [1] :

• If the directory is correct, something like the above will be listed (it may vary a bit..)
• You may then choose some canned answers based on what you want to do.
• Password reset is the default, and most used.
• Option 2, RecoveryConsole is for setting 2 parameters that the Windows 2000 and newer RecoveryConsole (boot from CD, select Recovery and console mode) uses. One of the parameters allows RecoveryConsole to be run without it prompting for the admin password. If you do not know what RecoveryConsole is, don’t bother. Or go search the net..
• Or if you want to do manual edit of registry, select your hives to load. Enter all names on one line with space between.

We select 1 to edit passwords..

4. PASSWORD RESET

Everything is set and ready, let’s roll!

========================================================= . Step THREE: Password or registry edit ========================================================= chntpw version 0.99.2 040105, (c) Petter N Hagen  [.. some file info here ..]  * SAM policy limits: Failed logins before lockout is: 0 Minimum password length        : 0 Password history count         : 0  <>========<> chntpw Main Interactive Menu <>========<>  Loaded hives: <sam> <system> <security>    1 - Edit user data and passwords   2 - Syskey status & change   3 - RecoveryConsole settings       - - -   9 - Registry editor, now with full write support!   q - Quit (you will be asked if there is something to save)   What to do? [1] -> 1  ===== chntpw Edit User Info & Passwords ====  RID: 01f4, Username: <Administrator> RID: 01f5, Username: <Guest>, *disabled or locked* RID: 03e8, Username: <HelpAssistant>, *disabled or locked* RID: 03eb, Username: <pnh>, *disabled or locked* RID: 03ea, Username: <SUPPORT_388945a0>, *disabled or locked*  Select: ! - quit, . - list users, 0x<RID> - User with RID (hex) or simply enter the username to change: [Administrator]

Here you can enter the username you want to reset the password for. NOTE: It is case-sensitive, write it exact as listed (without the < and > of course)

Or if the name uses some characters that cannot be displayed, enter it’s ID number (RID), like this: 0×1f4 would select administrator.

We select the default, which is administrator.

RID     : 0500 [01f4] Username: Administrator fullname:  comment : Built-in account for administering the computer/domain homedir :   Account bits: 0x0210 = [ ] Disabled        | [ ] Homedir req.    | [ ] Passwd not req. |  [ ] Temp. duplicate | [X] Normal account  | [ ] NMS account     |  [ ] Domain trust ac | [ ] Wks trust act.  | [ ] Srv trust act   |  [X] Pwd don't expir | [ ] Auto lockout    | [ ] (unknown 0x08)  |  [ ] (unknown 0x10)  | [ ] (unknown 0x20)  | [ ] (unknown 0x40)  |   Failed login count: 0, while max tries is: 0 Total  login count: 3  * = blank the password (This may work better than setting a new password!) Enter nothing to leave it unchanged Please enter new password: *

Some information is displayed. Also, if the account is locked, you will be asked if you wish to unlock it (not shown here)

We go for the blank password option (*) WHICH IS HIGLY RECOMMENDED over setting a new one.

Please enter new password: * Blanking password!  Do you really wish to change it? (y/n) [n] y Changed!   Select: ! - quit, . - list users, 0x - User with RID (hex) or simply enter the username to change: [Administrator] !

! brings us back to the main menu here.

<>========<> chntpw Main Interactive Menu <>========<>  Loaded hives:       1 - Edit user data and passwords   2 - Syskey status & change   3 - RecoveryConsole settings       - - -   9 - Registry editor, now with full write support!   q - Quit (you will be asked if there is something to save)   What to do? [1] -> q

5. WRITING OUT THE CHANGES

Everything has been done, time to commit the changes.

Hives that have changed:  #  Name  0   - OK  ========================================================= . Step FOUR: Writing back changes ========================================================= About to write file(s) back! Do it? [n] : y

THIS IS YOUR LAST CHANCE! If you answer y here there will be a write to disk!

Writing  sam  NOTE: A disk fixup will now be done.. it may take some time  Mounting volume... OK  Processing of $MFT and $MFTMirr completed successfully.  NTFS volume version is 3.1.  Setting required flags on partition... OK  Going to empty the journal ($LogFile)... OK  NTFS partition /dev/ide/host0/bus0/target0/lun0/part1 was processed successfully. NOTE: Windows will run a diskcheck (chkdsk) on next boot. NOTE: this is to ensure disk intergity after the changes  ***** EDIT COMPLETE *****  You can try again if it somehow failed, or you selected wrong New run? [n] : n

That was all. The disk fixup is only run on NTFS filesystems, and will force chkdsk next time windows boots.

Please answer n here and then reboot, CTRL-ALT-DEL. Remember to remove the floppy or CD.

What can go wrong?

Lots of things can go wrong, but most faults won’t damage your system.

The most critical moment is when writing back the registry files to NTFS. Sometimes it emits errors, even if the new data in fact has been written. The most common problem seen during 2004 is that it does not change the password, or even messes it up so it is impossible to log in with that user. This does not happen often, however. Unfortunately, I haven’t found the exact cause yet.

Also, see the FAQ for help with common problems.

For linux-knowledged people, you may do things manually if the scripts fail, you have shells on tty1-tty4 (ALT F1 – ALT F4).

Bootdisk history

2005-03-03

• New CD release (sorry, when yet again rewiring the driver stuff, I did not have time to make floppy stuff work)
• Contains disk driver updates (SATA maybe more working now)?
• New driver auto-probe and load. Better now?
• NTFS updates, writes should be more safe, I hope, working more often.
• No changes to the password routines themselves.

2005-03-03

• Driver update only, with a few fixes to the autoprobe, too.
• Some popular drivers like aacraid, megaraid and some SATA-drivers were problematic or missing, now hopefully here.
• Note that most SATA-drivers also need the libata.ko.gz file, autprobe loads it if needed.
• The driver archive are too big to include all drivers on a floppy so remove some you’re sure you don’t need. Remember to always keep pcitable.gz and moddep.gz if you want autoprobe to work.
• The CD of course includes all drivers.
• The manual try-all-drivers load is buggy, and won’t try to load all drivers, it will stop after each that has not been tried before. But specifying a single driver directly still works.
• No changes to password edit routines

2004-12-05

• NEW! BETTER! driver probe system! It now uses PCI info to find drivers to load. Select ‘d’ from the disk menu if needed, and it should do it’s job automatically.
• This should make SATA and other drivers which require multiple driver modules load correctly! Sorry about the mess earlier.
• PCI-to-driver mapping database and some tools by Mandrakesoft. Thanks!
• NOTE: The disk drivers archive (sc041205.zip) has now grown too large to unzip to a single floppy, so just leave out things you don’t need. Read more about this at the bottom of the page.
• All drivers are of course included on the CD as earlier.

2004-08-18

• Fixed some critical bugs when doing registry edit (key/value add/del/expand), see main page for more details
• More drivers: Some SATA drivers, hope they work.
• More drivers: Hopefully more up to date scsi/raid-drivers.
• NOTE: You may have to load more than one driver to get your disks to work, just repeat autoprobe until it can’t load more drivers.
• There MAY now be (some) support for Windows Dyamic Disks, but I have NOT tested it. Reports welcome, but I probably can not help each of you individually.
• Keyboard was reported not working on some laptops, hopefully OK now.
• USB keyboard works? I don’t have anything to test with.
• No special changes to the basic password edit stuff.
• Some more commands in registry editor, + better support for large registries. See main page.

9. aug 2004: (version 040116 and earlier) Some rather serious bugs have been discovered in the allocation routines, which are used when adding or deleting values or keys in the registry editor. In best case, they leak space, in worst case, it may corrupt the file.
NOTE: This does not generally affect password changing, since password reset just overwrites a few bytes in place, it does not reallocate space.
SUMMARY: Password edit OK. Regedit may not be. Fixed in newer versions.

040219:
Sorry, but the 040116 version seems to have a problem with keyboard on some laptops (keyboard does not work). I do not have a fix for it yet.

040114:

• Completely NEW system on the floppy/CD. New menues, and walkthrough. Also new docs, see above
• Support for setting the entry that makes RecoveryConsole skip prompt for admin password has been added.
• And since the new floppy stuff is just that, new, there may be glitches. Please tell me if there is anything serious! Thanks!
• For the linux techies, floppy now uses uClibc (reduced size libc) and BusyBox binaries properly, and also devfs which gives more logical and dynamic device paths (makes it easier to see what has been found). Some of the floppy design/build has been ripped from floppyfw by Thomasez.

(earlier history removed)
9705xx

• First public release.

Download

Note: Some links may be offsite.

• Bootdisk image (4605) (~3MB) – Bootable CD image, with newer drivers.
• bd080526.zip (~1.1MB) – Bootdisk image
• drivers2-080526.zip

Previous version is 041205 or 041217 and may sometimes be found here (also my site)

Mirror(s), in case you have problems getting the files from here.
I cannot guarantee that they are updated or that they havent changed anything!

• ListSoft’s mirror

NOTE THAT THE BOOTDISK CONTAINS CRYPTHOGRAPHIC CODE, and that it may be ILLEGAL to RE-EXPORT it from your country.

How to make the floppy

The unzipped image (bdxxxxxx.bin) is a block-to-block representation of the actual floppy, and the file cannot simply be copied to the floppy. Special tools must be used to write it block by block.

• Unzip the bd zip file to a folder of your choice.
• There should be 3 files: bdxxxxxx.bin (the floppy image) and rawrite2.exe (the image writing program), and install.bat which uses rawrite2 to write the .bin file to floppy.
• Insert a floppy in drive A: NOTE: It will lose all previous data!
• Run (doubleclick) install.bat and follow the on-screen instructions.
• Thanks to Christopher Geoghegan for the install.bat file (some of it ripped from memtest86 however)

Or from unix:

dd if=bd??????.bin of=/dev/fd0 bs=18k

How to make and use the drivers floppy

NOTE: Not all files will fit on a floppy, so leave out what you think you do not need!

• Format (or delete all contents) on a floppy
• Unzip the drivers you think you may need to it
• Files with names ending in .ko.gz should end up in a directory called scsi
• Be sure to also include the files moddep.gz and pcitable.gz, they are the dependency list, and pci mappings.
• To use, at the disk select menu, select ‘d’ to auto-load, and you will be asked to swap to the drivers floppy when needed.

How to make the CD

Unzipped, there should be an ISO image file (cd??????.iso). This can be burned to CD using whatever burner program you like, most support writing ISO-images. Often double-clikcing on it in explorer will pop up the program offering to write the image to CD. Once written the CD should only contain some files like “initrd.gz”, “vmlinuz” and some others. If it contains the image file “cd??????.iso” you didn’t burn the image but instead added the file to a CD. I cannot help with this, please consult you CD-software manual or friends.

The CD will boot with most BIOSes, see your manual on how to set it to boot from CD. Some will auto-boot when a CD is in the drive, some others will show a boot-menu when you press ESC or F10/F12 when it probes the disks, some may need to have the boot order adjusted in setup.

• XP: Small, Free Way to Use and Mount Images (ISO files) Without Burning Them
• Windows Recovery Console commands
• Edit the Windows boot settings
• Hidden commands in windows …
• Bypass Windows Genuine Advantage WGA Validation:updated v1.7.17.0

Join our Facebook Fanpage

This is a command prompt trick that you can talk to your friends through it. This is the code you will need if you did not get it down

@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

Remember to save it’s name as Messenger.bat

• Messenger Key-Get the passwords – Google Talk Passwords
• Yahoo Messenger Virus Detected
• How To: Create a New User With Admin Rights On a NetwoRK
• Hack “paypal”
• How To Backup Your Browser’s Data

Join our Facebook Fanpage

I tell u all by dis virus in my older post i found bout dat virus on 1 post in abhishek web..

..!!

so guy if u got fucked wd dis virus no problem let’s try 2 resolve by “registry game”

all u have 2 manupulate ur registry file..

follow:-

* 1: It sets your default IE/browser page to nsl-school.org, you can’t even change it back to other page. If you open IE from your comp some malicious code will automatically executed into your computer.

2: It will disables the Task manager / reg edit. So you can’t kill the Trojan process anymore.

3: Files that are gonaa installed by this virus are svhost.exe , svhost32.exe , internat.exe.

You can find these files in windows/ & temp/ directories.

4: It will sends the secured & protected information to attacker

How to remove this manually from your computer ?
1: Close the browser n Log out messenger / Remove Internet Cable.

2: To enable Regedit

Click Start, Run and type this command exactly as given below: (better – Copy and paste)
Quote:
REG add HKCU\Software\Mic*ft\Windows\CurrentVersion\Polici es\System /v DisableRegistryTools /t REG_DWORD /d 0 /f
3: To enable task manager : (To kill the process we need to enable task manager)

Click Start, Run and type this command exactly as given below: (better – Copy and paste)
Quote:
REG add HKCU\Software\Mic*ft\Windows\CurrentVersion\Polici es\System /v DisableTaskMgr /t REG_DWORD /d 0 /f
4: Now we need to change the default page of IE though regedit.

Start>Run>Regedit

From the below locations in Regedit chage your default home page to google.com or other.
Quote:
HKEY_CURRENT_USER\SOFTWARE\Mic*ft\Internet Explorer\Main

HKEY_ LOCAL_MACHINE\SOFTWARE\Mic*ft\Internet Explorer\Main

HKEY_USERS\Default\Software\Mic*ft\Internet Explorer\Main
Just replace the attacker site with google.com or set it to blank page.

5: Now we need to kill the process from back end. Press Ctrl + Alt + Del

Kill the process svhost32.exe . ( may be more than one process is running.. check properly)

6: Delete svhost32.exe , svhost.exe files from Windows/ & temp/ directories. Or just search for svhost in your comp.. delete those files.

7: Go to regedit search for svhost and delete all the results you get.
Quote:
Start>Run>Regedit
8: Restart the computer. That’s it now you are virus free.

if u don’t wanna restart just open task-manager & delete explorer.exe process

go in file option of task manager n type C:/

click ok

hey now u r free from shit..

enjoy..!

source :-Drhack.net

• Yahoo Messenger Virus Detected
• Criminal Hackers targeted MySpace/YouTube ?
• Hidden commands in windows …
• Firefox2 Tweaks: Power-Surfing Experience
• Edit the Windows boot settings

Join our Facebook Fanpage

How to modify Firefox’s configuration (about:config)

All this “advanced config” talk got you worried? Fear not, my friend. Here’s the deal: Firefox’s configuration is a long list of keys and values. To view this list, type about:config into the Firefox address bar. Then, enter the name of the key you want to update in the “Filter” field. The list will narrow to only the entries that match your keyword as you type, as shown.

To modify the value of a key, double-click on the value field and update the entry. To see your changes, restart your browser. Isn’t Easy .
Got it? Good. Let’s get to tweaking.

Session restore

Fx 2.0 only: As a blogger and web mail user, it breaks my heart to recount how many times I’ve composed a long post or email message, then accidentally closed the tab or browser and lost all my work. No more! With Firefox 2, set the browser.startup.page key to 3 to restore your browsing session – with form entries intact! – every time you start your browser or undo close tab after a wayward click. Note: By default, Firefox 2 automatically restores your session if your browser crashes – but this does it every time you restart your browser normally. Thanks for the tip, Arun!
Key: browser.startup.page
Modified Value: 3
Default: 1 (open your specified homepages)

Update: Ryan points out that doing it this way is like swatting a fly with a sledgehammer. To do it the normal person way, from the Tools menu choose Options, and in the Main area, select “Show my windows and tabs from last time” from the “When Firefox starts” dropdown. D’oh! Thanks Ryan!

Tab width before scrolling kicks in

Fx 2.0 only: The biggest interface changes in Firefox 2 involve tabbed browsing. Power surfers who open more than a dozen tabs will notice that Firefox 2 minimizes tabs to a certain width, then sets the excess to scroll off the tab bar with left and right arrows. As someone who often has more than a dozen tabs open, not being able to see them all made me crazy. One solution is to reduce the minimum tab width so that more tabs fit in the bar before the scroll kicks in. The default is 100 pixels; I found that 75 worked better for me – page titles were still readable, but more tabs could fit. Compare 100 width, which fits 7 tabs across at this size (click to enlarge):

To disable tab scrolling entirely, set the value to 0.
Key: browser.tabs.tabMinWidth
Modified Value: 75 (fit in more tabs before overflow enables scroll)
Alternate Modified Value: 0 (disable scroll entirely)
Default: 100

Tab close buttons

Fx 2.0 only: Another tab interface change in Firefox 2 is the addition of a close button on each individual tab. I happen to love this, but some hate it, saying it causes them to accidentally close a tab when just trying to switch to it. If you’re a hater, revert to the Firefox 1.5 behavior by changing the browser.tabs.closeButtons value to 3. This will not display close tabs on individual tabs, and turn on a single close tab button at the right end of the tab bar.
Key: browser.tabs.closeButtons
Modified Value: 3 (revert to Firefox 1.5 behavior)
Alternate Modified Value: 2 (don’t display any close tab buttons)
Default: 1 (display close buttons on all tabs)

Fetch only what you click

Fx .6 and up: Firefox has this wacky little feature that downloads pages from links it thinks you may click on pages you view, like the top result on a page of Google results. This means you use up bandwidth and CPU cycles and store history for web pages you may not have ever viewed. Creepy, eh? To stop that madness, set the network.prefetch-next key to false.
Key: network.prefetch-next
Modified Value: false

Limit RAM usage

All versions: Goodness knows I’ve done a good amount of belly-aching about Firefox’s voracious appetite for RAM. (It’s consistently the most memory-intensive process on both my PC and Mac.) Happily a simple config tweak got Mem Use right back down to a more comfortable number. Along with the previous prefetch mod, set your browser.cache.disk.capacity to a value that fits your total RAM.
Key: browser.cache.disk.capacity
Modified Value: Depends on your system’s total memory. According to Computerworld:

For RAM sizes between 512BM and 1GB, start with 15000. For RAM sizes between 128MB and 512M, try 5000.

Turn off chrome tooltips

All versions: I have an irritating Firefox problem on my Mac. When I try to drag a bookmark into one of my bookmark toolbar folders, the tool tip gets in the way and prevents the drop from working. Argh! Like you, I already know what all the buttons on my browser chrome do, so the tool tips aren’t necessary. To turn them off, set the browser.chrome.toolbar_tips key value to false. Bonus is, it solved my Mac’s bookmark drag and drop problem.
Key: browser.chrome.toolbar_tips
Modified Value: false

Lastly, though 2.0’s default value is a lot more reasonable than 1.5’s, you can use about:config to put off that annoying Unresponsive Script dialog on Javascript-heavy web pages.

Update: From the comments, a few more good about:config tweaks:
layout.spellcheckDefault = 2 turns on Firefox 2’s spell-checking in input fields as well as textareas. (That means no more typos in Lifehacker post headlines!)
browser.urlbar.hideGoButton=true turns off the rarely-used Go button at the end of the address bar, for more room to see long URLs. Thanks, sister-ray!

See the MozillaZine about:config wiki page for the exhaustive list of Firefox preferences keys, their possible values and effects.

• Make old Extensionc Compitible in Firefox2
• How To Backup Your Browser’s Data
• “resolved” New YaHoo! MeSseNger ViRus Attack!!
• orkut scrap flooder
• Best Proxy Bypass Trick [sites]

Join our Facebook Fanpage